|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WG | GSM Releases
(3: Ph1, 4: Ph2, 5: R96, 6: R97, 7: R98, 8: R99) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.10-1 |
geran3 |
|
MS conformance specification - Part 1: Conformance specification |
|
The present document describes the technical characteristics and methods of test for Mobile Stations (MS), for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 400 MHz, 900 MHz and 1800 MHz band (GSM 400, GSM 900 and DCS 1800), standardized by ETSI Special Mobile Group (SMG).
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.10-2 |
geran3 |
|
MS conformance specification - Part 2: PICS proforma specification |
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for Global System for Mobile Stations (MSs), operating in the 900 MHz and 1800 MHz frequency band (GSM 900 and DCS 1800) within the European digital cellular telecommunications system (Phase 2), in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646 7 and ETS 300 406.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.10-3 |
geran3 |
|
MS conformance specification - Part 3: Layer3 Abstract Test Suite |
|
The present document specifies the Abstract Test Suite (ATS) and partial IXIT proforma for the Network Layer (Layer 3) at the mobile radio interface of the GSM or DCS (Phase 2+) mobile stations (MS) conforming to the TSs for the Radio Resource management, the Mobility Management, the circuit-switched Call Control, the Supplementary Services and Short Message Services for the digital cellular telecommunications systems (Phase 2+).
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.10-4 |
ct6 |
|
MS conformance specification - Part 4: SIM application toolkit conformance test specification |
|
The present document describes the technical characteristics and methods of test for testing the SIM Application Toolkit implemented in Mobile Stations (MS) for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 450 MHz, 480 MHz, 700 MHz, 750 MHz, 850 MHz, 900 MHz, 1800 MHz and 1900 MHz frequency band (GSM 400, GSM 700, GSM 750, GSM 850, GSM 900, DCS 1800 and PCS 1900) within the European digital cellular telecommunications system, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646 7 and ETS 300 406.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.11 |
ct6 |
|
Specification of the SIM-ME Interface |
|
The present document defines the interface between the Subscriber Identity Module (SIM) and the Mobile Equipment (ME) for use during the network operation phase of GSM as well as those aspects of the internal organization of the SIM which are related to the network operation phase. This is to ensure interoperability between a SIM and an ME independently of the respective manufacturers and operators. The concept of a split of the Mobile Station (MS) into these elements as well as the distinction between the GSM network operation phase, which is also called GSM operations, and the administrative management phase are described in the TS 02.17.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.12 |
ct6 |
|
Specification of the 3 volt SIM-ME Interface |
|
This European Telecommunications Standard (ETS) defines the aspects of the Subscriber Identity Module Mobile Equipment (SIM - ME) interface which are based on 3V technology to be used in the Mobile Station (MS). It specifies the electrical and logical requirements necessary for the operation of the 3V SIM - ME interface where it differs from TS 11.11 (ETS 300 608). For all aspects of the SIM - ME interface which are not covered by this ETS, TS 11.11 (ETS 300 608) applies.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.13 |
ct6 |
|
Test specification for SIM API for Java card |
The present document covers the minimum characteristics considered necessary in order to provide compliance to TS 03.19.
The present document describes the technical characteristics and methods of test for testing the SIM API for Java Card implemented in the subscriber identity modules (SIMs) for GSM.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.14 |
ct6 |
|
Specification of the SIM Application Toolkit (SAT) for the SIM-ME interface |
The present document defines the interface between the Subscriber Identity Module (SIM) and the Mobile Equipment (ME), and mandatory ME procedures, specifically for "SIM Application Toolkit".
SIM Application Toolkit is a set of commands and procedures for use during the network operation phase of GSM, in addition to those defined in TS 11.11.
Specifying the interface is to ensure interoperability between a SIM and an ME independently of the respective manufacturers and operators. The concept of a split of the Mobile Station (MS) into these elements as well as the distinction between the GSM network operation phase, which is also called GSM operations, and the administrative management phase are described in TS 02.17.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.18 |
ct6 |
|
Specification of the 1.8 Volt SIM-ME Interface |
|
The present document defines the aspects of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface which are based on 1.8V technology to be used in the Mobile Station (MS). It specifies the electrical and logical requirements necessary for the operation of the 1.8V SIM - ME interface where it differs from TS 11.11. For all aspects of the SIM - ME interface which are not covered by the present document, TS 11.11 applies.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.19 |
ct6 |
|
CTS SIM Fixed Part |
|
The present document defines the aspects of the internal organization of the FP-SIM which are related to the CTS initialization and CTS enrolment operation phase of CTS as well as the files contained in the SIM for dedicated CTS operation. This is to ensure interoperability between a FP-SIM and a CTS-FPE independently of the respective manufacturers and operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.21 |
geran1 |
|
BSS equipment specification - Radio aspects |
The present document specifies the Radio Frequency (RF) test methods and conformance requirements for GSM 400, GSM 900 and DCS 1800, PCS 1900, GSM 850, MXM 850 and MXM 1900 Base Station Systems (BSS)s. These have been derived from, and are consistent with, the core GSM specifications specified in the requirements reference subclause of each test with the exception that requirements expressed as a reference to regulatory documents (e.g. FCC) have not been included in the present document.
The present document is applicable to BSS meeting the requirements of either GSM Phase 2 or GSM Phase 2+. Unless otherwise stated, all tests are applicable to BSS meeting Phase 2 and/or Phase 2+ GSM requirements, because the requirements of the Phase 2 and Phase 2+ core GSM specifications which are referenced in the test are consistent. Most differences between Phase 2 and Phase 2+ requirements represent Phase 2+ features which are optional for the BSS to support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.23 |
geran1 |
|
GSM Signalling Aspects Base Station System equipment Specification |
This European Telecommunication Standard (ETS) contains the signalling aspects of the Base Station System for GSM. The set of signalling tests cover major areas of functionality on the air, Abis and A interfaces, but is not designed to be a complete set of all the possible scenarios.
The tests were designed from the set of core specifications that exist for the GSM network and any changes that occur these specifications will be reflected in the test set documented within.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.26 |
geran1 |
|
BSS equipment specification - Repeaters |
The present document describes the Radio Frequency (RF) tests for GSM 450, GSM 480, GSM 900 and DCS 1800 repeaters which receive, amplify, and retransmit a received Mobile Station (MS) signal in the GSM MS transmit band and simultaneously receive, amplify and retransmit a received Base Transceiver Station (BTS) RF signal in the GSM BTS transmit band.
The present document is applicable to repeaters meeting the requirements of either GSM Phase 2 or GSM Phase 2+. Unless otherwise stated, all tests are applicable to repeaters meeting Phase 2 and/or Phase 2+ GSM requirements, because the requirements of the Phase 2 and Phase 2+ core GSM specifications which are referenced in the test are consistent. Most differences between Phase 2 and Phase 2+ requirements represent Phase 2+ features which are optional for the BSS to support.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.30 |
geran |
|
Mobile Services Switching Centre |
The scope of this report is to give guidelines concerning the specifications of a Mobile Services Switching Centre (MSC). In the case of discrepancy between this report and the approved core GSM recommendations the latter shall prevail.
The different functions provided by the MSC are identified with an indication of the relevant recommendations where the definitive specifications can be found. It should be noted that this report gives example PLMN configurations for the purposes of indicating the most general routing and interworking scenarios. These example PLMN configurations shall not be interpreted in such a way as to constrain network topology, since the internal routing within a country remains a national matter. For each function, an indication is given as to whether it is mandatory or optional.
The purpose of this report is to give an overview of the MSC functions needed to implement the GSM system, in order to help both the administrations/operators in the procurement of their equipments and the manufacturers tendering the MSC.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.31 |
geran |
|
Home Location Register Specification |
The scope of this report is to give guidelines concerning the specification of the Home Location Register (HLR). In the case of discrepancy between this report and the approved core GSM recommendations the later shall prevail. Each function is specified as either mandatory or optional.
The different functions provided by the HLR are identified with an indication of the relevant recommendations where the definitive specifications can be found.
The purpose of this report is to give an overview of the HLR functions needed to implement the GSM system, in order to help both the Administrations/Operators in the procurement of their equipments and the manufacturers tendering the HLR.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.32 |
geran |
|
Visitor Location Register Specification |
The scope of this report is to give guidelines concerning the specification of the Visitor Location Register (VLR). In the case of discrepancy between this report and the approved core GSM recommendations the later shall prevail. Each function is specified as either mandatory or optional.
The different functions provided by the VLR are identified with an indication of the relevant recommendations where the definitive specifications can be found.
The purpose of this report is to give an overview of the VLR functions needed to implement the GSM system, in order to help both the Administrations/Operators in the procurement of their equipments and the manufacturers tendering the VLR.
|
|
|
|
|
|
|
|
|
|
|
| | |
|
GSM TS 11.40 |
geran3 |
|
GSM System Simulator specification |
|
The System Simulator (SS) is an equipment or assembly of equipments which enables the tests detailed in the modules "Aspect II" and "Aspect III" of TS 11.10 to be conducted. It simulates the network side of the MS-BSS interface as part of its testing function.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
