tech-invite   World Map
3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search     Home
Top        in Index        Prev        None

TS 51.026 (RAN6)
BSS equipment specification – Part 4: Repeaters

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) V14.0.0    2017/03    19 p.
(P) V13.0.0    2015/12    19 p.
(P) V12.0.0    2014/09    19 p.
(P) V11.0.0    2012/09    19 p.
(P) V10.3.0    2012/03    19 p.
(P) V9.4.0    2012/03    19 p.
(P) V8.3.0    2010/04    19 p.
(P) V7.3.0    2010/04    19 p.
(P) V6.1.0    2005/07    19 p.
(P) V5.0.0    2002/07    19 p.
(P) V4.0.0    2002/01    19 p.
(P) GSM Rel-99 v8.0.2    2000/10    18 p.
(P) GSM Rel-98 v7.0.0    2002/05    17 p.
(P) GSM Rel-97 v6.0.1    2002/06    17 p.
(P) GSM Rel-96 v5.2.1    1998/06    17 p.
(P) GSM Phase-2 v4.2.2    1996/10    16 p.

Rapporteur:  Mr. Andersen, Niels Peter Skov
Antecedent:  TS 11.26    

This TS describes the Radio Frequency (RF) tests for GSM repeaters (frequency bands according to clause 4.1) which receive, amplify, and retransmit a received Mobile Station (MS) signal in the GSM MS transmit band and simultaneously receive, amplify and retransmit a received Base Transceiver Station (BTS) RF signal in the GSM BTS transmit band.

This TS is applicable to repeaters meeting the requirements of either GSM Phase 2 or GSM Phase 2+. Unless otherwise stated, all tests are applicable to repeaters meeting Phase 2 and/or Phase 2+ GSM requirements, because the requirements of the Phase 2 and Phase 2+ core GSM specifications which are referenced in the test are consistent. Most differences between Phase 2 and Phase 2+ requirements represent Phase 2+ features which are optional for the BSS to support.


Here        Top



1   Scope   PDF-p. 6
2   References
3   Definitions and abbreviations   PDF-p. 7
4   General
5   Spurious emissions
6   Intermodulation attenuation
7   Out of band gain   PDF-p. 12
8   Frequency error
9   Modulation accuracy at GMSK modulation
10   Modulation accuracy at 8-PSK, QPSK, 16-QAM, 32-QAM or AQPSK modulation
A   Testing of gain for part band repeaters   PDF-p. 16
B   Change history   PDF-p. 17

Up        Top