tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

Top          in Index          Prev          Next

TS 51.021 (RAN6)
Base Station System (BSS) equipment specification – Radio aspects

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) V14.1.0    2017/06    xx p.       (P) V14.0.0    2017/03    243 p.
(P) V13.4.0    2017/06    xx p.       (P) V13.3.1    2016/12    247 p.
(P) V12.3.0    2014/12    232 p.
(P) V11.4.0    2013/09    236 p.
(P) V10.7.0    2012/12    232 p.
(P) V9.10.0    2012/09    231 p.
(P) V8.13.0    2012/09    216 p.
(P) V7.10.0    2010/06    195 p.
(P) V6.5.0    2010/06    182 p.
(P) V5.6.0    2010/06    182 p.
(P) V4.7.0    2010/06    164 p.
(P) GSM Rel-99 v8.11.0    2009/06    161 p.
(P) GSM Rel-98 v7.5.0    2003/06    142 p.


Rapporteur:  Mr. Hofmann, Juergen
Antecedent:  TS 11.21    


This TS specifies the Radio Frequency (RF) test methods and conformance requirements for GSM 400, GSM 700, T-GSM 810, GSM 900 and DCS 1800, PCS 1900, GSM 850, MXM 850 and MXM 1900 Base Station Systems (BSS)s. These have been derived from, and are consistent with, the core GSM specifications specified in the requirements reference subclause of each test with the exception that requirements expressed as a reference to regulatory documents (e.g. FCC) have not been included in this TS.

This TS is applicable to BSS meeting the requirements of either GSM Phase 2 or GSM Phase 2+. Unless otherwise stated, all tests are applicable to BSS meeting Phase 2 and/or Phase 2+ GSM requirements, because the requirements of the Phase 2 and Phase 2+ core GSM specifications which are referenced in the test are consistent. Most differences between Phase 2 and Phase 2+ requirements represent Phase 2+ features which are optional for the BSS to support.


 

Here          Top          None          None          Next
part:    1     2     3     4

 

 

1   Scope [R4]   PDF-p. 10
2   References [R4]
3   Definitions, abbreviations, frequency bands and channels [R4]   PDF-p. 12
4   General test conditions and declarations [R4]   PDF-p. 16
5   Format and interpretation of tests [R4]

Up          Top          ToC