tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

 


 

Here          Top          Up          Prev          Next
part:    1     2     3     4     5     6

 

E Estimation of measurement uncertainty    E.1 General    E.2 Mismatch uncertainty between measurement receiver and the probe antenna    E.3 Mismatch uncertainty of the RF relay    E.4 Insertion loss of the probe antenna cable    E.5 Insertion loss of the probe antenna attenuator (if used)    E.6 Insertion loss of the RF relays (if used)    E.7 Influence of the antenna cable    E.8 Absolute gain of the probe antenna    E.9 Measurement receiver: uncertainty of absolute level    E.10 Measurement distance    E.11 Quality of quiet zone    E.12 Tx-power drift of DUT    E.13 Uncertainty related to the use of phantoms    E.14 Coarse sampling grid    E.15 Random uncertainty    E.16 Uncertainty of network analyzer    E.17 Uncertainty of the gain/efficiency of the calibration antenna    E.18 Base station simulator: uncertainty of the absolute level    E.19 BER measurement: output level step resolution    E.20 Statistical uncertainty of the BER measurement    E.21 BER data rate normalization uncertainty    E.22 DUT sensitivity drift    E.23 Cable loss measurement uncertainty    E.24 Signal generator: uncertainty of the absolute output level    E.25 Signal generator: output level stability    E.26 Insertion loss: calibration antenna feed cable    E.27 Insertion loss: calibration antenna attenuator (if used)    E.28 Chamber Statistical Ripple and Repeatability    E.29 Additional Power Loss in EUT Chassis   
...

 

E   Estimation of measurement uncertainty   PDF-p. 205
E.1   General
E.2   Mismatch uncertainty between measurement receiver and the probe antenna   PDF-p. 209
E.3   Mismatch uncertainty of the RF relay
E.4   Insertion loss of the probe antenna cable   PDF-p. 215
E.5   Insertion loss of the probe antenna attenuator (if used)
E.6   Insertion loss of the RF relays (if used)
E.7   Influence of the antenna cable
E.8   Absolute gain of the probe antenna   PDF-p. 216
E.9   Measurement receiver: uncertainty of absolute level
E.10   Measurement distance
E.11   Quality of quiet zone   PDF-p. 217
E.12   Tx-power drift of DUT
E.13   Uncertainty related to the use of phantoms   PDF-p. 218      Up
E.14   Coarse sampling grid   PDF-p. 220
E.15   Random uncertainty   PDF-p. 221
E.16   Uncertainty of network analyzer   PDF-p. 222
E.17   Uncertainty of the gain/efficiency of the calibration antenna
E.18   Base station simulator: uncertainty of the absolute level
E.19   BER measurement: output level step resolution      Up
E.20   Statistical uncertainty of the BER measurement
E.21   BER data rate normalization uncertainty   PDF-p. 223
E.22   DUT sensitivity drift
E.23   Cable loss measurement uncertainty
E.24   Signal generator: uncertainty of the absolute output level   PDF-p. 224
E.25   Signal generator: output level stability
E.26   Insertion loss: calibration antenna feed cable
E.27   Insertion loss: calibration antenna attenuator (if used)
E.28   Chamber Statistical Ripple and Repeatability
E.29   Additional Power Loss in EUT Chassis      Up

Up          Top          ToC