The present document describes the test procedure for the radiated performances measurements of the user
The handheld UE measurement procedures explained in this document are defined for roaming bands for the speech
mode position (beside the head and beside the head and hand) and hand phantom browsing mode position. Laptop
mounted equipment (LME) measurement procedures are defined for roaming bands for the data mode transfer position
(laptop ground plane phantom). Laptop embedded equipment (LEE) measurement procedures are defined for roaming
bands for the data mode transfer position (free space).
The browsing mode position explained in this document applies when the UE is held in hand, but not pressed against
ear (such as web browsing and navigation).
The data mode transfer position (free space) explained in this document applies when the UE is used away from the
user's head. Free space measurements are applicable to devices used in the data mode transfer position that consist of
the laptop mounted equipment (LME) plug-in UEs and laptop embedded equipment (LEE) UEs.
All bands are potential roaming bands, and the requirements for roaming bands shall therefore be fulfilled for all bands
supported by a UE.
Radiated performance of multiple-antenna receivers for handheld UE is defined for roaming bands in free space
MIMO OTA Maximum uncertainty of test system and test tolerance
| MIMO OTA TRMS requirements for PS1
| Estimation of measurement uncertainty
| MIMO OTA Definitions, symbols and abbreviations
| MIMO OTA Environmental Requirements