tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

 


 

Here          Top          Up          Prev          None
part:    1     2     3     4     5     6     7     8     9     10
   11     12     13     14     15     16     17     18

 

A [N] Reference Measurement Channels    A.1 PDSCH    A.2 PCFICH/PDCCH/PHICH    A.3 PUSCH    A.4 Reference Measurement Channels for ProSe Direct Discovery    A.5 Reference measurement channels for ProSe Direct Communication    A.6 ProSe Receive Traffic Generator    A.7 MPDCCH Reference Channels for Cat-M1 UEs    A.8 PDSCH Reference Channels for Cat-M1 UEs    A.9 Reference PRACH Configurations    A.10 General configuration for NB-IoT    A.11 V2V Sidelink Communication on Dedicated V2V Carrier    B [N] Propagation Conditions    B.0 No interference    B.1 Static propagation condition    B.2 Multi-path fading Propagation Conditions    C [N] Downlink Physical Channels    C.0 Downlink signal    C.1 General    C.2 Set-up    C.3 Test specific scenarios    D [N] OFDMA Channel Noise Generator (OCNG)    D.1 OCNG Patterns for FDD    D.2 OCNG Patterns for TDD    D.3 OCNG Patterns for Narrowband IoT    E [N] Cell configuration mapping    F [N] Measurement uncertainties and Test Tolerances    F.1 Acceptable uncertainty of Test System (normative)    F.2 Interpretation of measurement results (normative)    F.3 Test Tolerance and Derivation of Test Requirements (informative)    G [N] Statistical Testing    G.1 General    G.2 Statistical testing of delay and UE measurement performance in RRM tests    G.X Theory to derive the numbers in Table G.2.3-1 (informative)    H [N] Default Message Contents    H.1 Common contents of system information messages exceptions    H.2 Common contents of system information blocks exceptions    H.3 Default RRC messages and information elements contents exceptions    H.4 Default RRC messages and information elements contents exceptions for Carrier Aggregation    H.5 Default RRC messages and information elements contents exceptions for FeICIC    H.6 Default RRC messages and information elements contents exceptions for Proximity based services    H.7 Default RRC messages and information elements contents exceptions for eMTC    I [N] Conditions for RRM requirements applicability for operating bands    I.1 Conditions for E-UTRAN RRC_IDLE state mobility    I.2 Conditions for UE Measurements Procedures in RRC_CONNECTED State    I.3 Conditions for measurements performance requirements for UE    I.4 RRM Requirements Exceptions    J Handling requirements and tests for different releases and UE capabilities    J.1 General considerations    J.2 Concrete scenarios    K Change history   

 

A  (Normative)   Reference Measurement Channels   Word-p. 3574
A.1   PDSCH
A.2   PCFICH/PDCCH/PHICH   Word-p. 3581      Up
A.3   PUSCH
A.4   Reference Measurement Channels for ProSe Direct Discovery   Word-p. 3583
A.5   Reference measurement channels for ProSe Direct Communication
A.6   ProSe Receive Traffic Generator   Word-p. 3584      Up
A.7   MPDCCH Reference Channels for Cat-M1 UEs
A.8   PDSCH Reference Channels for Cat-M1 UEs   Word-p. 3589      Up
A.9   Reference PRACH Configurations   Word-p. 3595
A.10   General configuration for NB-IoT
A.11   V2V Sidelink Communication on Dedicated V2V Carrier
B  (Normative)   Propagation Conditions   Word-p. 3602
C  (Normative)   Downlink Physical Channels   Word-p. 3603
D  (Normative)   OFDMA Channel Noise Generator (OCNG)   Word-p. 3608
D.1   OCNG Patterns for FDD
D.1.1   OCNG FDD pattern 1: outer resource blocks allocation in 10 MHz   Word-p. 3609
D.1.2   OCNG FDD pattern 2: full bandwidth allocation in 10 MHz   Word-p. 3610
D.1.3   OCNG FDD pattern 3: outer resource blocks allocation in 1.4 MHz   Word-p. 3611
D.1.4   OCNG FDD pattern 4: full bandwidth allocation in 1.4 MHz   Word-p. 3612
D.1.5   OCNG FDD pattern 5: outer resource blocks allocation in 10 MHz (without MBSFN)
D.1.6   OCNG FDD pattern 6: full bandwidth allocation in 10 MHz (without MBSFN)   Word-p. 3613
D.1.7   OCNG FDD pattern 7: full bandwidth allocation in 1.4 MHz (without MBSFN)
D.1.8   OCNG FDD pattern 8: outer resource blocks allocation in 10 MHz for MBSFN ABS      Up
D.1.9   OCNG FDD pattern 9: full bandwidth allocation in 10 MHz for MBSFN ABS   Word-p. 3614
D.1.10   OCNG FDD pattern 10: outer resource blocks allocation in 10 MHz with user data in every SF (without MBSFN)   Word-p. 3615
D.1.11   OCNG FDD pattern 11: outer resource blocks allocation in 20 MHz
D.1.12   OCNG FDD pattern 12: full bandwidth allocation in 20 MHz   Word-p. 3616
D.1.13   OCNG FDD pattern 13: outer resource blocks allocation in 20 MHz (without MBSFN)   Word-p. 3617
D.1.14   OCNG FDD pattern 14: full bandwidth allocation in 20 MHz (without MBSFN)
D.1.15   OCNG FDD pattern 15: outer resource blocks allocation in 5 MHz   Word-p. 3618
D.1.16   OCNG FDD pattern 16: full bandwidth allocation in 5 MHz   Word-p. 3619
D.1.17   OCNG FDD pattern 17: outer resource blocks allocation in 20 MHz with user data in every subframe (without MBSFN)
D.1.18   OCNG FDD pattern 18: outer resource blocks allocation in 5 MHz (without MBSFN)   Word-p. 3620      Up
D.1.19   OCNG FDD pattern 19: full bandwidth allocation in 5 MHz (without MBSFN)
D.1.20   OCNG FDD pattern 20: outer resource blocks allocation in 5 MHz with user data in every subframe (without MBSFN)   Word-p. 3621
D.1.21   OCNG FDD pattern 21: Generic resource blocks allocation (without MBSFN)
D.2   OCNG Patterns for TDD   Word-p. 3622
D.3   OCNG Patterns for Narrowband IoT   Word-p. 3630
E  (Normative)   Cell configuration mapping   Word-p. 3633      Up
F  (Normative)   Measurement uncertainties and Test Tolerances   Word-p. 3666
G  (Normative)   Statistical Testing   Word-p. 3814
H  (Normative)   Default Message Contents   Word-p. 3818
H.1   Common contents of system information messages exceptions
H.2   Common contents of system information blocks exceptions      Up
H.3   Default RRC messages and information elements contents exceptions   Word-p. 3830      Up
H.4   Default RRC messages and information elements contents exceptions for Carrier Aggregation   Word-p. 3862      Up
H.5   Default RRC messages and information elements contents exceptions for FeICIC   Word-p. 3873
H.6   Default RRC messages and information elements contents exceptions for Proximity based services   Word-p. 3877
H.7   Default RRC messages and information elements contents exceptions for eMTC   Word-p. 3882      Up
I  (Normative)   Conditions for RRM requirements applicability for operating bands   Word-p. 3884
I.1   Conditions for E-UTRAN RRC_IDLE state mobility
I.2   Conditions for UE Measurements Procedures in RRC_CONNECTED State
I.3   Conditions for measurements performance requirements for UE   Word-p. 3891
I.3.1   Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements
I.3.2   Void
I.3.3   Conditions for inter-frequency RSRP and RSRQ Accuracy Requirements
I.3.4   Conditions for inter-frequency relative RSRP and RSRQ Accuracy Requirements
I.3.5_7   Void
I.3.8   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements   Word-p. 3892
I.3.9   Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction
I.3.10   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction
I.3.11   Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information      Up
I.3.12   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information   Word-p. 3893
I.3.13   Void
I.3.14   Conditions for Intra-Frequency Absolute Discovery Signal Measurement Accuracy Requirements
I.3.15   Conditions for Intra-Frequency Relative Discovery Signal Measurement Accuracy Requirements   Word-p. 3894
I.3.16   Conditions for Inter-Frequency Absolute Discovery Signal Measurement Accuracy Requirements
I.3.17   Conditions for Inter-Frequency Relative Discovery Signal Measurement Accuracy Requirements   Word-p. 3895
I.3.18_24   -
I.3.25   Conditions for NB-IoT intra-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1
I.3.26   Conditions for NB-IoT inter-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1
I.4   RRM Requirements Exceptions   Word-p. 3896
J   Handling requirements and tests for different releases and UE capabilities   Word-p. 3898
K   Change history   Word-p. 3899

Up          Top