tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

 


 

Here          Top          Up          Prev          Next
part:    1     2     3     4     5     6     7

 

 

7   Receiver characteristics [R8]
7.1   General
7.2   Reference sensitivity level
7.3   Dynamic range   PDF-p. 200
7.4   In-channel selectivity   PDF-p. 204
7.5   Adjacent Channel Selectivity (ACS) and narrow-band blocking   PDF-p. 208
7.6   Blocking   PDF-p. 217
7.7   Receiver spurious emissions   PDF-p. 233
7.8   Receiver intermodulation   PDF-p. 235
8   Performance requirement [R8]   PDF-p. 245
8.1   General
8.2   Performance requirements for PUSCH
8.2.1   Performance requirements of PUSCH in multipath fading propagation conditions transmission on single antenna port
8.2.1A   Performance requirements of PUSCH in multipath fading propagation conditions transmission on two antenna ports [R10]   PDF-p. 254
8.2.2   Performance requirements for UL timing adjustment   PDF-p. 257
8.2.3   Performance requirements for HARQ-ACK multiplexed on PUSCH
8.2.4   Performance requirements for High Speed Train conditions   PDF-p. 261
8.2.5   Performance requirements for PUSCH with TTI bundling and enhanced HARQ pattern [R12]
8.2.6   Enhanced performance requirements type A of PUSCH in multipath fading propagation conditions with synchronous interference [R13]
8.2.6A   Enhanced performance requirements type A of PUSCH in multipath fading propagation conditions with asynchronous interference [R13]   PDF-p. 269
8.2.7   Performance requirements of PUSCH in multipath fading propagation conditions transmission on single antenna port for supporting Cat-M1 UEs [R13]   PDF-p. 273

Up          Top          ToC