Tech-invite   World Map
3GPP     Specs     Glossaries     UICC       IETF     RFCs     Groups     SIP     ABNFs       T+       Search     Home
 


 

Here        Top        Up        Prev        None
part:    1     2     3     4     5     6     7     8     9     10
   11     12     13     14     15     16     17     18     19     20     21     22     23     24     25

 

 

A.9.10   SSTD [R13]
A.9.11   RSSI [R13]
A.9.12   Channel occupancy [R13]   Word-p. 2537
A.9.13   RS-SINR [R13]   Word-p. 2541
A.10   Proximity-based Services in Any Cell Selection State [R12]      Up
A.11   V2V Sidelink Communication for V2V Operation on Dedicated V2V Carrier [R14]
A.12   - [R14]      Up
A.12.1   V2X UE Transmission Timing Accuracy Test
A.12.2   Initiation/Cease of SLSS Transmission with V2X Sidelink Communication   Word-p. 2567
A.12.3   V2X Synchronization Reference Selection/Reselection Tests
A.12.4   Congestion Control Measurement Test for V2X UE
A.12.5   Interruptions due to V2X Sidelink Communication
B  (Normative)   Conditions for RRM requirements applicability for operating bands [R10]   Word-p. 2581
B.1   Conditions for E-UTRAN RRC_IDLE state mobility
B.2   Conditions for UE Measurements Procedures in RRC_CONNECTED State   Word-p. 2587
B.2.1   Conditions for E-UTRAN intra-frequency measurements      Up
B.2.2   Conditions for E-UTRAN intra-frequency measurements with autonomous gaps
B.2.3   Conditions for E-UTRAN inter-frequency measurements   Word-p. 2588
B.2.4   Conditions for E-UTRAN inter-frequency measurements with autonomous gaps
B.2.5   Conditions for E-UTRAN OTDOA intra-frequency RSTD Measurements
B.2.6   Conditions for E-UTRAN OTDOA inter-frequency RSTD Measurements   Word-p. 2589
B.2.7   Conditions for Measurements of the secondary component carrier with deactivated SCell
B.2.8   Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction   Word-p. 2590
B.2.9   Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction with CRS Assistance Information [R11]
B.2.10   Conditions for E-UTRAN intra-frequency discovery signal measurements [R12]   Word-p. 2591
B.2.11   Conditions for E-UTRAN inter-frequency discovery signal measurements [R12]
B.2.12   Conditions for E-UTRAN intra-frequency discovery signal measurements under operation with frame structure 3 [R13]
B.2.13   Conditions for E-UTRAN inter-frequency discovery signal measurements under operation with frame structure 3 [R13]   Word-p. 2593
B.2.14   Conditions for E-UTRAN intra-frequency measurements by UE Category M1 [R13]
B.2.15   Conditions for NB-IoT intra-frequency measurements by UE Category NB1 [R13]   Word-p. 2595      Up
B.2.16   Conditions for NB-IoT intra-frequency RSTD measurements by UE Category NB1 [R14]
B.2.17   Conditions for NB-IoT inter-frequency RSTD measurements by UE Category NB1 [R14]   Word-p. 2596
B.2.18   Conditions for E-UTRAN inter-frequency measurements by UE Category M1 [R14]
B.2.19   Conditions for E-UTRAN measurements by UE Category M2 [R14]   Word-p. 2598
B.2.20   Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M1 [R14]
B.2.21   Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M2 [R14]   Word-p. 2599
B.3   Conditions for measurements performance requirements for UE   Word-p. 2600
B.3.1   Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements      Up
B.3.2   Void
B.3.3   Conditions for inter-frequency RSRP and RSRQ Accuracy Requirements
B.3.4   Conditions for inter-frequency relative RSRP and RSRQ Accuracy Requirements
B.3.5   Conditions for UE Rx - Tx time difference
B.3.6   Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements   Word-p. 2601
B.3.7   Conditions for inter-frequency RSTD measurements
B.3.8   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements
B.3.9   Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction
B.3.10   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction
B.3.11   Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information [R11]   Word-p. 2602
B.3.12   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information [R11]      Up
B.3.13   Conditions for UE Rx-Tx Time Difference Measurement under Time Domain Measurement Resource Restriction with CRS Assistance Information [R11]
B.3.14   Conditions for Intra-Frequency Absolute Discovery Signal Measurement Accuracy Requirements [R12]
B.3.15   Conditions for Intra-Frequency Relative Discovery Signal Measurement Accuracy Requirements [R12]   Word-p. 2603
B.3.16   Conditions for Inter-Frequency Absolute Discovery Signal Measurement Accuracy Requirements [R12]   Word-p. 2604
B.3.17   Conditions for Inter-Frequency Relative Discovery Signal Measurement Accuracy Requirements [R12]
B.3.18   Conditions for Intra-frequency Absolute RS-SINR Accuracy Requirements [R12]
B.3.19   Conditions for Inter-frequency Absolute RS-SINR Accuracy Requirements [R12]
B.3.20   Conditions for Inter-frequency Relative RS-SINR Accuracy Requirements [R13]   Word-p. 2605
B.3.21   Conditions for Intra-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3 [R13]
B.3.22   Conditions for Intra-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3 [R13]   Word-p. 2606
B.3.23   Conditions for Inter-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3 [R13]
B.3.24   Conditions for Inter-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3 [R13]
B.3.25   Conditions for NB-IoT intra-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1 [R13]
B.3.26   Conditions for NB-IoT inter-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1 [R13]
B.3.27   Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements for Category 0 [R13]   Word-p. 2608
B.3.28   Conditions for Intra-Frequency Relative RSRP Accuracy Requirements for Category 0 [R13]
B.3.29   Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for NB1 [R14]
B.3.30   Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for NB1 [R14]
B.3.31   Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M1 [R14]
B.3.32   Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M2 [R14]   Word-p. 2609
B.4   RRM Requirements Exceptions      Up
B.5   Conditions for Measurement Performance Requirements for ProSe UE [R12]
B.6   Conditions for V2X [R14]
C   Change history:   Word-p. 2615

Up        Top