Tech-invite3GPPspecsGlossariesIETFRFCsGroupsSIPABNFsWorld Map



 

Here   Top   Up   Prev   Next
1…      7…   7.2…   8…   8.2.2   8.2.3…   8.3…   8.4…   9…   12…   14…   14.3…   15…   18…   18.2…   18.3…   A…     

 

 

7.2  RLC testingWord-p. 720
7.2.0  General
7.2.1  Transparent modeWord-p. 721
7.2.2  Unacknowledged modeUp
7.2.2a  Unacknowledged mode (TDD MBSFN) (non-IMB)Word-p. 742
7.2.2b  Unacknowledged mode (MBSFN IMB)Word-p. 752
7.2.3  Acknowledged modeWord-p. 763
7.2.3.1  General information for AM tests
7.2.3.2  Segmentation and reassembly / Selection of 7 or 15 bit Length IndicatorsWord-p. 764
7.2.3.3  Segmentation and Reassembly / 7-bit "Length Indicators" / Padding or Piggy-backed StatusWord-p. 766
7.2.3.4  Segmentation and Reassembly / 7-bit "Length Indicators" / LI = 0Word-p. 768
7.2.3.5  Reassembly / 7-bit "Length Indicators" / Reserved LI valueWord-p. 770
7.2.3.6  Reassembly / 7-bit "Length Indicators" / LI value > PDU sizeWord-p. 771
7.2.3.7  Segmentation and Reassembly / 15-bit "Length Indicators" / Padding or Piggy-backed StatusWord-p. 772
7.2.3.8  Segmentation and Reassembly / 15-bit "Length Indicators" / LI = 0Word-p. 774Up
7.2.3.9  Segmentation and reassembly / 15-bit "Length Indicators" / One octet short LIWord-p. 775
7.2.3.10  Reassembly / 15-bit "Length Indicators" / Reserved LI valueWord-p. 777
7.2.3.11  Reassembly / 15-bit "Length Indicators" / LI value > PDU sizeWord-p. 778
7.2.3.12  Correct use of Sequence NumberingWord-p. 779
7.2.3.13  Control of Transmit WindowWord-p. 781
7.2.3.14  Control of Receive WindowWord-p. 785
7.2.3.15  Polling for status / Last PDU in transmission queueWord-p. 787
7.2.3.16  Polling for status / Last PDU in retransmission queueWord-p. 788
7.2.3.17  Polling for status / Poll every Poll_PDU PDUsWord-p. 790
7.2.3.18  Polling for status / Poll every Poll_SDU SDUsWord-p. 792Up
7.2.3.19  Polling for status / Timer triggered polling (Timer_Poll_Periodic)Word-p. 794
7.2.3.20  Polling for status / Polling on Poll_Window% of transmission windowWord-p. 796
7.2.3.21  Polling for status / Operation of Timer_Poll timer / Timer expiryWord-p. 798
7.2.3.22  Polling for status / Operation of Timer_Poll timer / Stopping Timer_Poll timerWord-p. 800
7.2.3.23  Polling for status / Operation of Timer_Poll timer / Restart of the Timer_Poll timerWord-p. 802
7.2.3.24  Polling for status / Operation of timer Timer_Poll_ProhibitWord-p. 804
7.2.3.25  Receiver Status Triggers / Detection of missing PDUsWord-p. 807
7.2.3.26  Receiver Status Triggers / Operation of timer Timer_Status_PeriodicWord-p. 808
7.2.3.27  Receiver Status Triggers / Operation of timer Timer_Status_ProhibitWord-p. 809
7.2.3.28  Status reporting / Abnormal conditions / Reception of LIST SUFI with Length set to zeroWord-p. 811Up
7.2.3.29  Timer based discard, with explicit signalling / Expiry of Timer_DiscardWord-p. 813
7.2.3.29a  Timer based discard, with explicit signalling / Expiry of Timer_Discard when Timer_STATUS_prohibit is activeWord-p. 815
7.2.3.30  Timer based discard, with explicit signalling / Obsolete MRW_ACK
7.2.3.31  Timer based discard, with explicit signalling / Failure of MRW procedureWord-p. 817
7.2.3.32  SDU discard after MaxDAT-1 number of transmissionsWord-p. 819
7.2.3.33  Operation of the RLC Reset procedure / UE OriginatedWord-p. 821
7.2.3.34  Operation of the RLC Reset procedure / UE TerminatedWord-p. 825
7.2.3.35  Reconfiguration of RLC parameters by upper layersWord-p. 826
7.2.3.36  Flexible handling of RLC PDU sizes for AM RLCWord-p. 829
7.2.3.37  RLC PDU Size Adaptation in UplinkWord-p. 832Up
7.2.3.38  Flexible handling of RLC PDU sizes for AM RLC in uplinkWord-p. 833
7.2.4  MBMSWord-p. 836
7.2.5  MultiflowWord-p. 867
7.3  PDCPWord-p. 874
7.3.1  General
7.3.2  IP Header Compression and PID assignmentWord-p. 880
7.3.3  PDCP sequence numbering when lossless SRNS RelocationWord-p. 926
7.3.4  PDCP configuration testingWord-p. 1002
7.3.5  PDCP RoHC testing
7.3.6  PDCP RoHC performance testingWord-p. 1007
7.3.7  PDCP AMR Data PDU testingWord-p. 1037
7.4  BMCWord-p. 1050

Up   Top   ToC