tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

Top          in Index          Prev          Next

TR 25.848 (RAN6)
Physical Layer Aspects of UTRA High Speed Downlink Packet Access

|   ToC   |   3GPP‑Page   |   Help   |

(W-zip) V4.0.0    2001/04    89 p.


Rapporteur:  Mr. Baker, Matthew
See also:  –


This TR describes the physical layer aspect of the techniques behind the concept of high-speed downlink packet access (HSDPA). Furthermore, it also reports the performance and complexity evaluation of the HSDPA, done for the HSDPA feasibility study.



 

Here          Top

 

1 Scope    2 References    3 Definitions, symbols and abbreviations    4 Background and Introduction    5 Overview of Technologies considered to support UTRA High Speed Downlink Packet Access    5.1 Hybrid ARQ (H-ARQ)    5.2 Fast Cell Selection (FCS)    5.3 Multiple Input Multiple Output Antenna Processing    5.4 Stand-Alone DSCH    6 Proposed physical layer structure of High Speed Downlink Packet Access    6.1 Basic Physical Structure <frame length, update rates spreading codes, etc>    6.2 Adaptive Modulation and Coding (AMC)    6.3 Hybrid ARQ (H-ARQ)    6.4 Fast Cell Selection (FCS)    6.5 Multiple input multiple output antenna processing    6.6 Associated signaling needed for operation of High Speed Downlink Packet Access    6.7x Evaluation of technologies    6.7 Adaptive Modulation and Coding (AMC)    6.8 Hybrid ARQ (H-ARQ)    6.9 Fast Cell Selection (FCS)    6.10 Multiple input multiple output antenna processing    7 Physical layer aspects for TDD mode    7.1 Techniques to support HSDPA for TDD mode    7.2 Simulation assumptions    7.3 Link-level simulation results    8 Backwards compatibility aspects    9 Conclusions and recommendations    A Simulation Assumptions and Results    A.1 Link simulation assumptions    A.2 Link simulation results    A.3 System simulation assumptions    A.4 System simulation results    B Examples of Performance Evaluation methods    C Throughput Metric Definitions    D Change history   

 

1   Scope   Word-p. 7
2   References
3   Definitions, symbols and abbreviations
4   Background and Introduction
5   Overview of Technologies considered to support UTRA High Speed Downlink Packet Access
6   Proposed physical layer structure of High Speed Downlink Packet Access
6.1   Basic Physical Structure <frame length, update rates spreading codes, etc>      Up
6.2   Adaptive Modulation and Coding (AMC)   Word-p. 12
6.3   Hybrid ARQ (H-ARQ)
6.4   Fast Cell Selection (FCS)   Word-p. 14
6.5   Multiple input multiple output antenna processing   Word-p. 16      Up
6.6   Associated signaling needed for operation of High Speed Downlink Packet Access   Word-p. 18
6.7x   Evaluation of technologies   Word-p. 19
6.7   Adaptive Modulation and Coding (AMC)
6.8   Hybrid ARQ (H-ARQ)
6.9   Fast Cell Selection (FCS)
6.10   Multiple input multiple output antenna processing
7   Physical layer aspects for TDD mode
8   Backwards compatibility aspects   Word-p. 53      Up
9   Conclusions and recommendations
A   Simulation Assumptions and Results   Word-p. 54
B   Examples of Performance Evaluation methods   Word-p. 85
C   Throughput Metric Definitions   Word-p. 87
D   Change history   Word-p. 89

Up          Top