tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

Top          in Index          Prev          Next

TS 23.110 (SA2)
UMTS Access Stratum – Services and Functions

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) V14.0.0    2017/03    27 p.
(P) V13.0.0    2015/12    27 p.
(P) V12.0.0    2014/09    27 p.
(P) V11.0.0    2012/09    27 p.
(P) V10.0.0    2011/03    27 p.
(P) V9.0.0    2009/12    27 p.
(P) V8.0.0    2008/12    27 p.
(P) V7.0.0    2007/06    27 p.
(P) V6.0.0    2005/01    28 p.
(P) V5.0.0    2003/10    29 p.
(P) V4.0.0    2001/04    29 p.
(P) V3.4.0    2000/03    29 p.


Rapporteur:  Mr. Lopez-Torres, Oscar
See also:  –


This TS specifies the services provided by the Access Stratum to the rest of the system. The adopted architecture is given by TS 23.101.

This TS describes the main functions visible at the boundary between the Access Stratum and the rest of the system, it describes in general terms the information flows, both control and user data, over this boundary and relevant for the Access Stratum.

This TS is the basis of the detailed specifications of the protocols which rule the information flows, both control and user data, between the Access Stratum and the parts of UMTS outside the Access Stratum, and of the detailed specifications of the UTRAN. These detailed specifications are to be found in other Technical Specifications.


 

Here          Top

 

 

1   Scope   PDF-p. 6
2   References
3   Definitions and abbreviations
4   Basic Assumptions   PDF-p. 7
5   Functions location inside/outside Access Stratum   PDF-p. 8
6   Access Stratum services
6.1   Service Access Points (SAPs)   PDF-p. 14
6.2   Operations
6.2.1   General
6.2.2   Common operations   PDF-p. 16
6.2.3   IF side only operations
6.2.4   UE side only operations
6.3   Parameters structure
A   Change history   PDF-p. 25

Up          Top