tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Gloss.     Arch.     IMS     UICC    |    Misc.    |    search     info

3GPP (SA4)
TS 06.10














Full Rate Speech Transcoding

(P) GSM Rel-99 v8.2.0    2001/06    64 p.
(P) GSM Rel-98 v7.2.0    2001/06    64 p.
(P) GSM Rel-97 v6.2.0    2001/06    64 p.
(P) GSM Rel-96 v5.3.0    2001/06    67 p.
(P) GSM Phase-2 v4.3.0    2001/06    58 p.
(P) GSM Phase-1 v3.2.0    1992/02    95 p.

Rapporteur:  HELLWIG, Karl
Descendant(s):  TS 46.010    

The transcoding procedure specified in this TS is applicable for the full rate Traffic Channel (TCH) in the digital cellular telecommunications system. The use of this transcoding scheme for other applications has not been considered.

In TS 06.01, a reference configuration for the speech transmission chain of the digital cellular telecommunications system is shown. According to this reference configuration, the speech encoder takes its input as a 13 bit uniform PCM signal either from the audio part of the mobile station or on the network side, from the PSTN via an 8 bit/A or u-law (PCS 1900) to 13 bit uniform PCM conversion. The encoded speech at the output of the speech encoder is delivered to a channel encoder unit which is specified in TS 05.03. In the receive direction, the inverse operations take place.

This TS describes the detailed mapping between input blocks of 160 speech samples in 13 bit uniform PCM format to encoded blocks of 260 bits and from encoded blocks of 260 bits to output blocks of 160 reconstructed speech samples. The sampling rate is 8000 sample/s leading to an average bit rate for the encoded bit stream of 13 kbit/s. The coding scheme is the so called Regular Pulse Excitation Long Term prediction Linear Predictive Coder, here after referred to as RPE LTP.

This TS also specifies the conversion between A and u-law (PCS 1900) PCM and 13 bit uniform PCM. Performance requirements for the audio input and output parts are included only to the extent that they affect the transcoder performance. This TS also describes the codec down to the bit level, thus enabling the verification of compliance to this TS to a high degree of confidence by use of a set of digital test sequences.

0      PDF-p. 7
1   Description
2   Transmission characteristics   PDF-p. 13
3   Functional description of the RPE-LTP codec
4   Codec homing   PDF-p. 25
5   Computational details of the RPE-LTP codec      Up
5.1   Data representation and arithmetic operations
5.2   Fixed point implementation of the RPE-LTP coder   PDF-p. 29
5.3   Fixed point implementation of the RPE-LTP decoder
5.4   Tables used in the fixed point implementation of the RPE-LTP coder and decoder   PDF-p. 42
6   Digital test sequences   PDF-p. 43
A   Codec performance   PDF-p. 52
B   Test sequence disks   PDF-p. 61
C   Change History   PDF-p. 62