tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

Top        in Index        Prev        Next

TS 04.14 (RAN6)
Individual equipment type requirements and interworking – Special conformance testing functions

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) GSM Rel-99 v8.6.0    2004/07    46 p.
(P) GSM Rel-98 v7.3.0    2002/07    40 p.
(P) GSM Rel-97 v6.3.1    2002/07    41 p.
(P) GSM Rel-96 v5.1.0    1998/10    36 p.

Rapporteur:  HOWELL, Andrew
Descendant(s):  TS 44.014    

This TS specifies for Mobile Stations (MS), for the digital cellular communications system and Personal Communication Systems (PCS) operating in the 900 MHz and 1800 MHz band (GSM900 and DCS1800), standardized by ETSI SMG, those ME functions which are required for conformance testing purposes only. However, except for the Electrical Man Machine Interface (EMMI) and the Multi-slot TCH Loops, they are required for every mobile station.

For conformance tests, functions are activated via the radio interface, test SIM or dedicated pins. These functions must be capable of being activated when a test SIM is present but must not function with any other (e.g. network) SIM present except where otherwise stated within this TS. In this state, the MS must be able to perform all functions specified in this TS; in addition however, the special conformance testing functions must be operational.

The special conformance testing functions of the ME are enabled by use of a dedicated Subscriber Identity Module (test SIM, see TS 11.10-1 Annex 4). SIM, in general, is described in TS 11.11. The ME recognizes the test SIM by the Administrative Data Field.

This TS applies to the public land mobile radio service in the GSM900 and DCS1800 systems, using constant envelope modulation and operating on radio frequencies in the 900 and 1800 MHz bands respectively with a channel separation of 200 kHz and carrying 8 full rate channels or 16 half rate channels per carrier according to the TDMA principle.

This TS is part of the GSM-series of technical specifications. This TS neither replaces any of the other GSM technical specifications or GSM related TS, nor is it created to provide full understanding of (or parts of) the GSM900 and DCS1800 systems.

This TS applies to the unit which includes the hardware to establish a connection across the radio interface.


Here        Top        None        None        Next
part:    1     2



1   Scope   PDF-p. 6
2   References
3   Definitions, conventions, and applicability   PDF-p. 7
4   Activation and deactivation of special test functions in the MS
5   Internal test loops   PDF-p. 8
5.1   Single-slot TCH loops   PDF-p. 9
5.2   Multi-slot TCH loops
5.3   Deactivating loops
5.4   Multi-slot test mode for GPRS & EGPRS
5.5   EGPRS Switched Radio Block Loopback Mode
6   Activating and deactivating EMMI
7   Activating and deactivating DAI tests   PDF-p. 21
8   Message definitions and contents

Up        Top        ToC